ACA, ACV, DCV, OHM, Continuity Check - Clamp-on Tester for AC Current
- AC current measurement with current ranges up to 2000A
- AC/DC voltage and resistance measurements
- 54mm in diameter of measurable conductor
- Mean value display
- DC output function
- Data hold function
- Sleep function
- Approved for comformity to safety standards EN61010-1,
- EN61010-2-031, EN61010-2-032 （CAT. m 600 V, CAT. II1000 V）
- Get a Quote / Ask an Expert
- Submit a Review
page links
- DETAILS
- SPECIFICATIONS
Details
Specifications
| Display （LCD, Digital Counts） | 3999 |
| AC Current Accuracy （400A Reference） | 1.0+3（50/60Hz） 2.0+3（40~1kHz） |
| AC Current Accuracy （2000A Reference, 0~1500A） | 1.0+3（50/60Hz） 3.0+3（40~1kHz） |
| AC Voltage Accuracy （40/400V/750V Reference） | 1.0+2（50/60Hz） 1.5+3（40~1kHz） |
| DC Voltage Accuracy （40/400V/1000V Reference） | 1.0+2 |
| Resistance Accuracy （400/4k/40k/400kΩ reference） | 1.5+2, Beeps at below 50± 35Ω （continuity check） |
| DC Output Accuracy （400A, 0~400mV Reference） | ?.5% rdg ± 0.5mV （50/60Hz） ?.5% rdg ± 0.5mV （40~1kHz） |
| Method of detection | Mean Value |
| Response Time | Approx. 2 seconds |
| Range Switching | Manual-range （on AC current range） / Auto-range （on AC voltage range, resistance range） |
| Data hold | On all range |
| Operating temperature and humidity | 0-40°C, 85% RH or less （no condensation） |
| Influence of external magnetic field | 1A or less at 400A/m |
| Influence of conductor position | ± （2% rdg + 3dgt） or less |
| Safety Standard | Conforms EN 61010-1, EN61010-2-031, EN61010-2-032 |
| Circuit voltage | 1000Vrms or less |
| Withstanding voltage | 5.55kV AC for one minute |
| Power Supply | R6P（SUM-3）x2 or LR6x2 |
| Battery Life1 | 150 hours |
| Consumed current | Approx. 5mA |
| Sleep Function | Automatically powered down in about 10 minutes after the last switch operation |
| Diameter of measurable conductor | 54mm at maximum |
| Dimensions | Approx. 105（W）x247（H）x49（D）mm |
| Weight （Approx.） | 470g |
| Accessories | User's manual （IM CL150）, batteries, carrying case （93034） |
| Order Notes | Each item selected MUST be ordered as a separate line item. |
| Product Notes | All Clamp-on Meters include Test Leads （where applicable） and a carrying case. |
|
Selection Guide
| AC Current Range | 400/2000A |
| AC Current Resolution | 0.1A |
| AC Current Frequency characteristics | 40~1kHz |
| AC Current Method of detection | Mean Value |
| AC Voltage Measurement | O |
| DC Voltage Measurement | O |
| Continuity Check Measurement | O |
| Frequency Measurement | - |
| Temperature Measurement | - |
| Recorder output Function | O |
| Waveform monitor output Function | - |
| Data hold Function | O |
| Auto hold Function | - |
| Peak Hold Function | O |
| Maximum value memory Function | - |
| Mean value display Function | - |
| Filter Function | - |
| Range Hold Function | O （current range） |
| Auto ZERO Adjust Function | - |
| Auto power-off Function | O Sleep function （power-down） |
上一篇： CL135交直流鉗形表
下一篇：CL155橫河交直流鉗形表
產品中心
Products
相關文章
